Colloidal Silver Made Easy
LIMITED TIME SPECIAL - Credit
Card with $7500.00 limit
In order to obtain colloidal silver the molecular structure of silver needs to be changed. The altered substance then needs to be suspended in a liquid solution. Colloidal silver has been used for medicinal purposes for ages. The substance can be made at home following a few simple guidelines. supplies for colloidal silver In order to produce colloidal silver at home you will require 6 volt DC transformers, two alligator clips and two pure silver coins. You will also require some distilled water and a fish tank oxygenation bubbler with at least 2 feet of neoprene tubing. Lastly you will need a glass quart jar and a small airtight glass container. Making silver colloids Stage one The process starts by thoroughly cleaning all your equipment and supplies. The silver coins that will be used during the process need to be properly cleaned in order to obtain pure colloidal silver. 2nd Step Next up you will have to clip the plug off the DC connector towards the end of the transformer wire. You should leave the wall plug wire intact. After taking about one inch of the insulation off you need to separate the wires from the strip making sure that the wire in it self is not destroyed during the process. 3rd step The bare wires then need to be joined to the two alligator clips. They can be secured in the proper place via soldering or crimping. The two silver coins will be made to function as electrodes. They will be placed right underneath the alligator clamps on opposite sides. Step 4 The neoprene tube needs to be put on the bottom surface of the jar containing the silver coins. Fill the jar up to the 8 oz mark making sure the water level comes up the lower end of the clips. No part of the metal clamps should be touching the water as the only thing that should be submerged in the water are the two silver coins. 5th step After connecting the transformer and oxygenation bubbler leave the water to bubble for up to five hours. 6th step After the time has passed safely unplug the units and remove the coins. Make sure you thoroughly clean off any residue left from the process. These coins should be stacked away safely as they are good enough to be used again. The two coins can help you to make greater quantities of colloidal silver than you will ever require. You can additionally purify the colloidal silver that you have obtained by siphoning it into a storage bottle using the tubing rather than pouring it. Follow the above mentioned guidelines to make as much colloidal silver with ease at home. July 04 2009 06:48 am | Alternative Health 
Leave a Reply